Plastic grinding machine is widely used in the chemical industry, waste recycling, plastic pipe profile manufacturing, plastic modification and other fields of various plastic materials grinding processing. In the field of plastic grinding, it has the characteristics of low energy consumption and high output, grinding materials for PVC, PE, PC, PA, ABS, PS, TPU, and other materials, but also for rubber, plant fiber and other materials. What are the factors that affect the play of plastic grinding machines?

First of all, uneven feeding, too much material too little will cause inadequate grinding, finished powder can not be timely in the blower under the role of the return air duct discharge, increasing the workload of the blower, resulting in powdered materials in the air duct accumulation, the ultimate cause of air duct blockage. Therefore, we should ensure that the material is fed continuously and evenly when feeding, so as to avoid the phenomenon of blocking the air duct.

In addition, the dust collector is not a normal operation, dust collector is mainly used to recover the increased air volume in the wind turbine while removing the dust particles in the wind turbine, the increased exhaust air volume will be purified and discharged from the machine when the dust collector can not be normal dust removal work, a large number of dust particles material is easy to form a buildup in the air duct, so as to cause the blockage of the grinding mill wind duct.

Another is the lack of wind power, the material in the role of the blower along the return duct for transmission, so to keep the normal operation of the blower, not too small blower wind can not be transferred to the material movement, in the test to maintain the rated power and working voltage is normal, in order to maintain the equipment unrest lasting production work.

For the important accessories of the mill equipment blower, too much material is too little will cause ultra-fine grinding is not sufficient, the finished powder can not be timely in the blower under the role of the return air duct discharge, increased workload of the blower, resulting in powder material in the air duct accumulation, the ultimate cause of air duct blockage. Therefore, we should ensure that the material is fed continuously and evenly when feeding, so as to avoid the phenomenon of blocking the air duct. Usually also need to do a good job of regular inspection, once found fault should be dealt with in a timely manner, good maintenance of the blower is also an important factor in extending the life of the mill.

“WANROOE” production of the automatic grinding machine is the introduction of foreign advanced technology carefully developed, fully functional. All the mills in our factory use a combination of air and water cooling systems to make the machine run for a long time without heat. High-quality wear-resistant steel cutter, good wear resistance. High output, fine grinding, can be adjusted at will. The function is between 10 mesh and 100 mesh. Save time and electricity, no need for personal care. A wide range of applications can grind high pressure, low pressure, polyethylene, new material, recycled material suitable for plastic, roto molding, pipe plastic. Suitable for the production of small, medium and large plastic container enterprises. During the development of our factory for more than ten years, two series of products PNMP plastic grinding machine and PNMF plastic grinding machine have been in the industry with leading technology.