5 step repair pe pulverizer machine


With the great development of industrialized society, the industrial process is faster and faster, more and more industrial industries should be developed, at present, China’s PVC plastic grinding machine industry has slowly come out of the reliance on cheap labor and sacrifice the environment at the expense of the crude development model, gradually turned to a technology-based development model. China’s plastic machinery to increase investment in the technical content of equipment, energy-saving and improve the degree of automation of equipment, in addition, with the acceleration of the localization process of large pelletizing sets, domestic plastic machine manufacturers can take this opportunity to vigorously improve the technical content of products and enhance the degree of automation. But the great development of the industrial industry in fact and pe pulverizer machine industry, crusher industry are closely linked.

pe pulverizer, plastic pulverizer for sale, pulverizer machine for plastic, lldpe pulverizer machine, plastic pulverizing machine

PE pulverizer machine mainly has a body, grinding mechanism, feeding mechanism, grinding roller rolling distance adjustment mechanism, hydraulic automatic control mechanism, transmission mechanism and cleaning device seven main components. Plastic mill by the spindle equipped with precision bearings to drive the knife, driven by the knife, the dynamic knife high-speed rotation, and the fixed knife cut, so that the material into the strong collision, grinding and powder, through the wind, water cooling together, effective control of the material crushing temperature, to ensure that the quality of crushed materials will not change, in the configuration of automatic feeding, automatic discharge and automatic sorting system, greatly reducing the labor intensity.

In the process of using the pe pulverizer machine, there should be fixed personnel responsible for the care, the operator must have a certain level of technical skills. Before the installation of the operator must carry out the necessary technical training so that it understands the principle of Raymond mill performance, familiar with the operating procedures.

5 steps to repair the PE pulverizer machine.

1. The pe pulverizer machine should be installed on a horizontal concrete foundation and fixed with foot bolts.

2. The installation should pay attention to the vertical of the main body and the horizontal.

3. After installation, check whether the bolts of each part are loose and whether the main body barn door is tightened, if so, please tighten it.

4. Configure the power cord and control switch according to the power of the equipment.

5. After the inspection, carry out a test run with no load, and the test run will be normal for production. Be careful not to work under a large load that exceeds the capacity of the machinery, and to use the machinery within its capabilities. To try to ensure that the mechanical load is evenly added or subtracted, so that the machinery in relatively gentle load changes, specifically, is to more evenly add or subtract the throttle, to prevent the engine, work device action of the big ups and downs.