Description：
Nowadays, liquid nitrogen has played an increasingly important role in the food industry. This hot pepper and chilli pulverizer is designed to pulverize the materials that are difficult to pulverize at room temperature, especially suited to heat sensitive products, including plastics and foodstuffs. For example, liquid nitrogen mill /cryogenic mill is widely used in grinding PP, EVA, TPU, TPEE, nylon,PA11, PA1010, PA12, PA6, PA66, PA610, chilli /pepper, turmeric finger, sesame seed, herb and so on.
The grinding room is continually cooled with liquid nitrogen from the integrated cooling system before and during the grinding process. The liquid nitrogen circulates through the system and is continually replenished from an auto fill system in the exact amount. The temperature can be cooled down to -196°C, which can be adjusted according to the brittleness point of different stuffs. Thus the material is embrittled and volatile components are well preserved. Powerful impact blade lead to a perfect grinding efficiency. Admittedly, the auto fill system avoids direct contact with liquid nitrogen and makes the operation very safe.

Configuration：
Liquid nitrogen tank, material solo, machinery grinding machine, draught fan, powder discharging cyclone.

Working Principle：
This PNCP series Cryogenic Pulverizer using liquid nitrogen to lower the input material temperature to material embrittlement condition firstly, then go to the grinding chamber, the input materials were thoroughly pulverized through blade wheel’s high speed rotating, and the comprehensive force like mutual repeatedly impact, crash, shear and friction between the materials and blades, fluted disc, materials and materials.
Grinded materials will be classified and collected by air screen cone type classifier, the grinded material or powder which has not reached the material fineness degree will go back to the grinding chamber for re-grinding, most of the cool air will return back to grinding chamber for recycling usage.

Features:
While grinding, the cooling source of cryogenic pulverizer system is forming a closed-circuit circulation system, so the cooling source will be thoroughly used, save energy; and the particle fineness degree rang from 10-700 mesh, even reach micron fineness degree. Apply liquid nitrogen as grinding medium, achieve cryogenic grinding, anti-explosion, anti-oxidation, etc effect.
In the pulverizing system, the cold source forms a closed cycle system, which makes full use of energy and saves energy. The temperature of the cold source for grinding can be reduced to 196 degrees below zero. According to the brittle point temperature of the material, the temperature can be controlled in the grinding process, and the best grinding temperature can be selected, so as to reduce the energy consumption. The grinding fineness can reach 10-700 meshes, and even reach micron fineness. In addition, liquid nitrogen is used as a grinding medium to achieve ultra-low temperature comminution, which can achieve the comprehensive effect of explosion-proof and oxidation resistance of materials.