The choice of waste plastic crusher machine mainly depends on the type of material to be crushed, the shape and the degree of crushing required, different materials of waste plastics should be used to crush different equipment. Hard PVC, polystyrene, organic glass, phenolic resin, urea-formaldehyde resin, polyester resin, etc. is a class of brittle plastic, brittle and fragile, once subject to compression, and impact force, very easy to brittle crack, broken into small pieces, for this type of plastic suitable for compression or impact crushing equipment for crushing;

Below the cutting rotor, a replaceable sieve is installed to control the size of the shredded material passing through the sieve, allowing only materials smaller than the sieve aperture to pass through. The rotary shredder is equipped with an automatic reverse function, which will immediately activate in case of stubborn materials that are difficult to shred or excessive material blockage. This automatic reverse design not only effectively protects the machine from overload and damage, but also ensures the continuity and smoothness of the shredding operation. This single rotor shredder is controlled by a PLC system, with simple and intuitive operation. Simply touch the buttons on the control panel to control various functions. In addition, it also has an “automatic mode” that enables unmanned automatic operation, improving work efficiency while saving labor costs.

Scrap material due to the impact of external conditions and the role of light and heat, there have been different degrees of aging, obviously, a variety of additives also have different degrees of loss. In order to improve the quality of recycled products as much as possible, a certain amount of additives need to be added in the remanufacturing process, so as to improve the multifaceted performance of the return material molding process and products.

Based on consideration of some of the above factors, the following points should be taken into account when determining the formulation of remanufactured products.

1, The choice of additive type.
2, the determination of the number of additives added.
3, Adjustment of the formulation.