Plastic Film Shredder Machine Application:
Plastic film shredder machine is suited for shopping bags, garment bags, plastic bags, food bag/wrap, bubble wrap, pallet wrap, shrink wrap, paper towel and toilet paper overwrap, air packs (from shipped packages), agricultural film, industrial film, BOPP plastic film, printed film, woven bag, tons bag, jumbo bag, raffia bag, Big Bag, Raffia Big Bag, Bulk Bag, etc.

Plastic Film Shredder Machine Description:
Single shaft plastic film shredder machine uses the interaction of movable cutter heads and fixed knives to tear, cut and extrude the material into small size. It can be available for shredding a wide range of materials including plastic, wood, rubber, and paper, etc. The cutter head consists of a basic shaft and pieces of quadrangle cutter. There are four edges that are easy to change. ‘V’ shaped rotary cutters are fixed on a single shaft. The fixed cutter is mounted at an angle adjacent to the rotary cutter to achieve better cutting. The material is grabbed between ‘V’ shaped rotary cutters and fixed cutter shreds repeatedly. During the grinding process, the evenly cutting, saving of energy and reduction of noise are ensured by the installation of ‘V’ shape rotor knives. Also, the knives are very easy to install and remove.
Single Shaft Shredder ‘V’ shaped blade:

Plastic Film Shredder Machine Working principle:
The motor drives the shaft to make the knife rotates at a high speed, the material is put between the knife shaft and fixed knife, the materials are shredded, the qualified size will discharge from the screen mesh, the oversize material will be sent back for re shredding. The final product size can be adjusted by changing the final product size.
Plastic Film Shredder Machine Components:
 |
 |
Pusher System
Reinforced baseplate can reduce the impact caused by material entering the cutting chamber. A dust collection device is equipped at the bottom of the pusher system to guarantee the long-term stable performance of internal components. |
Heat treated rotor knives
Special DC53 steel (hardened) four edges use before the replacement |
 |
 |
V-cutting rotor design
with staggered cutter positioning |
Wear Resistant
Tungsten surface coating for abrasive applications |
 |
 |
Electronic Control Cabinet
Simply press the buttons on the control panel to control every movement, and “auto mode” can be selected on the control panel for fully automatic operation |
Screen Unit
Wide range of screens with a variety of configurations and mesh sizes are replaceable based on customers’ production requirements. The paper shredder will automatically stop while opening the screen unit to ensure operator safety. The screen is produced and mounted in sections, allow for easy maintenance. |
 |
 |
PLC control
Making it easier for fault diagnosis and maintenance |
Hydraulic Station
The pressure and rate of flow can be adjusted according to different materials. |
Plastic Film Shredder Machine Technical Features:
1. The plastic film shredder machine with the big feeding mouth, can put the big plastic or rubber product freely.
2. The rotary and cutting blade with an edge of a special design, can get very high efficiency and high capacity.
3. The shredder single shaft for plastic is controlled by PLC system; the blade can rotate in opposite direction and close automatically if something unexpected happens; with very high safety service.
4. The shredder single shaft for plastic runs slowly with low noise and is less dusty.
5. The blade material with special alloy steel made, with long life.
6. All machinery and electrical devices are protected in accordance with the European CE standard.
7. Hydraulic system Pushes the material automatically to the shredding rotor while working. More efficient and can achieve a high capacity. According to material kind, can adjust the pushing speed to avoid overload.
8. Cooler system(optional) can maintain the temperature for continuous operation.
Related Equipment:
Leave a Reply