• Woven Bag Agglomerator, Big Bag Agglomerator, Plastic Bag Agglomerator, Woven Bag Densifier, Plastic Bag Densifier

PP Woven Bag Agglomerator Densifier Machine

The strong design of double-bearing for holding the main shaft.
High-performance blades.
Temperature control.
Water flushing automatically.
Motor power from 37kw to 200kw.
Processing capacity from 80kg/h to 1000kg/h.

  • Product Description
  • Technical Parameters
  • Video

PP Woven Bag Agglomerator Densifier Machine Application areas:  
PP woven bag agglomerator densifier machine is used to agglomerate plastic scraps such as wet or dry recycling jumbo bags, bulk bags, plastic bags, big bags, woven bags, PP woven big bags, container bags, big super sacks, tons bags, space bags, food bags, cement bags, raffia bag, bulk bag, waste fishing nets and etc.
PP Woven Bag Agglomerator Densifier Machine Application
PP Woven Bag Agglomerator Densifier Machine Description:
The PP woven bag agglomerator (PP woven bag granulator) is a kind of waste thermoplastic thin film, and wall thickness is less than 2 mm of products can be granulated immediately. It can be wastes or thin films of soft polyvinyl chloride (PVC), high and low-pressure polyethylene, polypropylene and polystyrene, other thermoplastic plastic on aggregate, also on foaming polystyrene abandoned products for granulation.

 

PP Woven Bag Agglomerator Densifier Machine Working principle:
Putting the waste into the machine pot body makes the material be quickly cut by the high-speed rotating turn of the blade and the fixed blade shear, then the material along the pot body wall by the knife dish centrifugal force function, at the same time, the material turning up and down by paddle and from all around to move towards to the center of the pot body. The friction of the material itself and friction of the pot wall and blades produce much friction heat under the high speed, making the temperature of the material rises to the half-plastic condition and connects to a small lump. Before the materials will block, advanced preparation quantitative water will all spray into the material. The cold water that touches the hot materials will gasify and take out the surface heat soon, making the surface of the materials cool quickly and avoid blocking, then after the crushing effect between the rotary blade and fixed blade cut into particles(irregular size materials). During the crushing, Also may join the appropriate color pigments according to needs.

 

PP Woven Bag Agglomerator Densifier Machine Components:

Stainless Steel Material Arc Barrel Bottom
Stainless Steel Material
Material contact parts are used 304 stainless steel, welding fine polished smooth, easy to clean.
Arc Barrel Bottom
The arc design of the bottom of the barrel ensures no dead angle in stirring and no residue in discharging.
External Insulation of Barrel motor
External Insulation of Barrel
The barrel is covered with heat insulation layer to reduce heat loss and protect the operator’s safety.
Motor
The motor adopts Siemens, Wanan and other domestic brands of pure copper motor, with stable and reliable quality, and can be customized according to requirements.
Forced Oil Pump System Electronic Control
Forced Oil Pump System
Forced oil pump system for agglomerator bearing, which can cool bearing and also forced lubricated bearing. Except PNAG-100.
Electronic Control
The whole model adopts frequency conversion control and conforms to international standards such as CE/CSA.
Metal Detector Conveyor
Metal Detector(Optional )
Ferrous metal permanent magnetic belt or metal detector can prevent metal specials from entering the agglomerator and effectively protect the blades of the agglomerator.
Conveyor (Optional)
The plastic is conveyed to the agglomerator through the belt feeding device. The conveying speed is linked to the fullness of the agglomerator and the speed of the conveyor belt is automatically adjusted according to the current of the agglomerator.

PP Woven Bag Agglomerator Densifier Machine Features:
1. The PP/PE Plastic Agglomerator is used for the fast recycling of waste films, and woven bags.
2. The machine can quickly granulate used thermoplastic film or thermoplastic products which thicknesses of less than 2mm.
3. It’s applicable to the agglomerating of soft polyvinyl chloride, HD/LD polyethylene, polypropylene, polystyrene and other used thermoplastic products or film.
4. The granules produced by the plastic agglomerator can be supplied to the pelletizing machine for further granulating or just fed to the extruder and injection machine.
5. It is for augmentation of the bulk density of the LDPE, HDPE, PP, BOPP, PET film & bag flakes.

 

PP Woven Bag Agglomerator Densifier Machine Special Features
The strong design of double-bearing for holding the main shaft.
High-performance blades.
Temperature control.
Water flushing automatically.
Motor power from 37kw to 200kw.
Processing capacity from 80kg/h to 1000kg/h.

Leave a Reply

Your email address will not be published. Required fields are marked *

Model PNAG-100 PNAG-200 PNAG-300 PNAG-500 PNAG-600 PNAG-800 PNAG-1500
Spindle Speed (r/min) 1050 1050 950 850 750 750 650
Output(kg/h) 80-120 100-150 150-250 300-400 350-450 500-600 800-1000
Motor power(kw) 37 45 55 90 110 132 200
Voltage(V) 380 380 380 380 380 380 380
Volume(L) 100 200 300 500 600 800 1500
Weight(kg) 1000 1200 1800 2500 2700 3000 5000
Dimension(m) 1.7*0.75*1.5 1.7*0.85*1.5 2*0.85*1.6 2.3*0.95*1.7 2.3*1.1*1.75 2.5*1.25*1.8 3*1.6*2.1
Rotating Blades Qty(psc) 2 2 2 4 4 4 4
Fixed Blades Qty(psc) 6 6 6 8 8 8 8
Lubrication Method Grease lubrication Grease lubrication Grease lubrication Pressure lubrication Pressure lubrication Pressure lubrication Pressure lubrication

Video