WANROOETECH has been around for 15 years, expanding from its founding, focusing on recycling granulators, cleaning, shredder and shredder.Because of the scale of production, we put machines in different factories in order to produce more sophisticated machines.So far, we have four factories,the factory that makes the mill is the largest.Our factory design & manufacture plastic pulverizer machine and Grinding Mill which can be used for LLDPE/LDPE/PP/PET/PVC.

Cold pulverizer:
A complete set of cold mill by bin, mechanical crusher, induced draft fan, cyclone, flow sieve book (user), vacuum automatic feeding (user), liquid nitrogen tank (user), etc.

With liquid nitrogen for the cryogenic pulverizer system as the cold source, crushed material at low temperature by cooling after realizing brittle fractured state, into the mechanical crusher cavity by high-speed rotating impeller, the material and blade, tooth plate, material and material between repeated impact, collision, under the action of shear and friction, comprehensive, crushing effect;After crushed material sieving machine for grading and collect the airflow, the fineness requirement did not meet the material return bin crush, air conditioning most return to the recycling bin.

Wood Pulverizing Machine:
Wood Pulverizing Machine is a powder equipment which is used for the powder of light body material, fibrous material, brittle material and toughness material.Inlet adopts self-priming feed, improve the production safety coefficient, to overcome the traditional direct feed mill, accidentally into the metal piece that seriously damaged wood powder machine faults.

The machine is suitable for: wood powder, wood chaff, bamboo powder, chestnut, elm wood powder, wood grain, wood, leather grain, wood powder, cedar wood powder, dried small shrimps, anise powder, Chinese prickly ash, chili powder, pepper, refined cotton, feather, feather stalk, straw, wheat bran, rice husk, glued wood, potato ballast, cassava, Chinese herbal medicine, fish meal, cake, sanshui magnesium silicate, etc all fiber materials crushing process.It is an indispensable wood crushing equipment in the industries of bakelite, plastic, papermaking, mosquito-repellent incense, health incense, feed, Chinese herbal medicine and breeding.

It is driven by motor spindle high speed, the mechanical energy of the crushed material to produce high strength impact force, compression force, cutting force, friction force, so the machine for fiber content has the unique function of crusher.

MP Series Pulverizer: 
The main structure of the machine is equipped with a rolling bearing supporting the main shaft, which is driven by the motor, which drives the main shaft and the turbo on the main shaft.Circle grinding block, turbine and sieve composition is reasonable, compact structure, is a raw material for entering the machine in rotating airflow closely friction and impact of the airflow, occurred in turbine blade edge, and the gap between blade and grinding block, grind, again in the process, the turbine sucked into a large amount of air, the cooling machine abrasive, transmit the purpose of fine powder.The fineness of the crush depends on the predetermined material, the shape and size of the mesh, and the amount of material and air.This product structure is compact and reasonable, moderate volume, and with low consumption, high efficiency, stable rotation, low noise, reliable sealing, no dust pollution, the cold function is good, simple installation, easy disassembly are easy to fix, change the damaged pieces is convenient wait for a characteristic.

New mill design, high output, strong wear-resisting performance, and the life span is twice as long as a regular grinding disk. Use the new design of special bearings, achieved high speed, at the same time using only one drive motor, ensure the effective impact grinding, this greatly saved mechanical operation time and the control on the project. The installation maintenance is convenient, open door cover can clean up. The grinding process is fully sealed and no dust leakage. Fully automatic, automatic feeding, material and separation.

MF Series Pulverizer:
The basic principle of MF series mill grinder for by equipped with precision bearing spindle drive the knife dish, under the drive of the knife dish, high speed rotation, the moving knife and knife tangent, make the materials into a powerful collision, grinding into powder, through in the wind, water cooling, effective control of the grinding temperature material, make sure the quality of crushed material does not change, the machine is equipped with automatic feeding and discharging and automatic filter back to the grinding system, greatly reduces the labor intensity. In the process, the grinding chamber sucks in a large amount of air, which cools the machine and delivers the powder. The fineness of the crush depends on the predetermined material, the shape and size of the mesh, and the amount of material and air. This product structure is compact and reasonable, moderate volume, and with low consumption, high efficiency, stable rotation, low noise, reliable sealing, no dust pollution, the cold function is good, simple installation, easy disassembly are easy to fix, change the damaged pieces is convenient wait for a characteristic. The whole grinding process of this machine is completely closed, no dust leakage, and the cleaning of the material can be maintained by opening the door cover. The main engine starts with the new triangle mode, which greatly reduces the current when the motor starts. This machine is mainly composed of host, blower, super fineness screening machine, finished a whirlwind powder, cloth bag dust collector and connecting duct, billion plastic machinery according to customer needs, the selectivity can also be equipped with an elevator, surge bin, electric control cabinet, feeding machine, crusher, mixer and other auxiliary equipment.MF millstone mill is a series of flat grinding disc mill, which is widely used in the rubber industry. It is the ideal equipment for milling and grinding plastic, and it can grind up the powder processing of other materials such as PE, PP, PVC, etc.

The new bearing design is installed and the machine life is more durable. The new structure design, stainless steel pipe, stainless steel cyclone. The installation maintenance is convenient, open door cover can clean up. The grinding process is fully sealed and no dust leakage. Automation, lower manual, automatic feed, material and screening. The grinding powder can be controlled, easy to adjust, easy to operate. The cooling system adopts the combination of wind and water.

We adopt advanced production technology to improve your production efficiency.