Scrap FRP Recycling Fiberglass Shredder Machine Application:
Fiberglass shredder is a machine that used to shred the fiberglass into small pieces. There are many types of fiberglass shredders with different capacity and output size. You can always find the most optimal fiberglass shredder according to your actual needs. Fiberglass shredder is widely used in fiberglass recycling. This machine can make the fiberglass to be easily re-used in the following process.

 

Scrap FRP Recycling Fiberglass Shredder Machine Description:
Fiberglass Single shaft shredder uses the interaction of movable cutter heads and fixed knives to tear, cut and extrude the material into small size. It can be available for shredding a wide range of materials including plastic, wood, rubber, and paper, etc. The cutter head is consists of a basic shaft and pieces of quadrangle cutter. There are four edges that are easy to change. ‘V’ shaped rotary cutters are fixed on a single shaft. The fixed cutter is mounted at an angle adjacent to the rotary cutter to achieve better cutting. The material is grabbed between ‘V’ shaped rotary cutters and fixed cutter shreds repeatedly. During the grinding process, the evenly cutting, saving of energy and reduction of noise is ensured by the installation of ‘V’ shape rotor knives. Also, the knives are very easy to install and remove.

 

Single Shaft Shredder ‘V’ shaped blade:

Scrap FRP Recycling Fiberglass Shredder Machine Working principle:
The motor drives the shaft to make the knife rotates at a high speed, the material is put between the knife shaft and the fixed knife, the materials are shredded, the qualified size will discharge from the screen mesh, and the oversize material will be sent back for re shredding. The final product size can be adjusted by changing the final product size.

 

Scrap FRP Recycling Fiberglass Shredder Machine Components:

Pusher System Reinforced baseplate can reduce the impact caused by material entering the cutting chamber. A dust collection device is equipped at the bottom of the pusher system to guarantee the long-term stable performance of internal components.	Heat treated rotor knives Special DC53 steel (hardened) four edges use before the replacement
V-cutting rotor design with staggered cutter positioning	Wear Resistant Tungsten surface coating for abrasive applications
Electronic Control Cabinet Simply press the buttons on the control panel to control every movement, and “auto mode” can be selected on the control panel for fully automatic operation	Screen Unit Wide range of screens with a variety of configurations and mesh sizes are replaceable based on customers’ production requirements. The paper shredder will automatically stop while opening the screen unit to ensure operator safety. The screen is produced and mounted in sections, allow for easy maintenance.
PLC control Making it easier for fault diagnosis and maintenance	Hydraulic Station The pressure and rate of flow can be adjusted according to different materials.

Scrap FRP Recycling Fiberglass Shredder Machine Technical Features:
1. The shredder single shaft for plastic with a big feeding mouth, it can put the big plastic or rubber product freely.
2. The rotary and cutting blade with an edge of a special design, can get very high efficiency and high capacity.
3. The shredder single shaft for plastic is controlled by a PLC system; the blade can rotate in opposite directions and close automatically if something unexpected happens; with very high safety service.
4. The shredder single shaft for plastic runs slowly with low noise and is less dusty.
5. The blade material with special alloy steel made, with long life.
6. All machinery and electrical devices are protected in accordance with the European CE standard.
7. Hydraulic system Pushes the material automatically to the shredding rotor while working. More efficient and can achieve a high capacity. According to the material kind, can adjust the pushing speed to avoid overload.
8. Cooler system(optional) can maintain the temperature for continuous operation.

 

Related Equipment:
Fiberglass Recycling Line

Model	PNDS-600D	PNDS-800D	PNDS-1000D	PNDS-1200D	PNDS-1500D
Shredder Diameter (mm)	300	400	400	400	400
Rotating& Fixed Blades QTY	60+4	78+4	96+4	102+4	132+6
Capacity (kg/h)	450	700	1000	1200	1500
Main Motor Power(KW)	22×2	30×2	45×2	55×2	75×2

Video