Application:
Plastic pipe shredder is suited to HDPE pipe, pp pipe, pe pipe, PPR pipe, PVC pipe, drainage pipe, water pipe, plastic pipe, big solid block of plastic, plastic purges, plastic lumps, etc. Waste plastic pipes and tubes usually are in long size, so in the recycling process for such products, size reduction is the first step which usually is done by a shredder. Plastic tubes are turned into small scraps after shredding, and those scraps are then put into re-production according to various manufacturing requirements. Usually, the high quality and clean waste plastic are directly made into new plastic raw material; While for the unclean material which cannot be directly made into the raw plastic material, it will be processed by sorting, shredding, crushing, mixing with new resin raw material or adding additives, and melting, and then re-made into new plastic raw material. All these recycled raw plastic material can be made into a variety of plastic products, such as agricultural film, fertilizer packages, cement packages, plastic drum, bathroom accessories, kitchen accessories, so on and so forth.

Description:
Single shaft shredder uses the interaction of movable cutter heads and fixed knives to tear, cut and extrude the material into small size. It can be available for shredding a wide range of materials including plastic, wood, rubber, and paper, etc. The cutter head is consists of a basic shaft and pieces of quadrangle cutter. There are four edges that are easy to change. ‘V’ shaped rotary cutters are fixed on a single shaft. The fixed cutter is mounted at an angle adjacent to the rotary cutter to achieve better cutting. The material is grabbed between ‘V’ shaped rotary cutters and fixed cutter shreds repeatedly. During the grinding process, the evenly cutting, saving of energy and reduction of noise is ensured by the installation of ‘V’ shape rotor knives. Also, the knives are very easy to install and remove.
Single Shaft Shredder ‘V’ shaped blade:

Working principle:
The motor drives the shaft to make the knife rotates at a high speed, the material is put between the knife shaft and fixed knife, the materials are shredded, the qualified size will discharge from the screen mesh, the oversize material will be sent back for re shredding. The final product size can be adjusted by changing the final product size.
Technical Features:
1. The shredder single shaft for plastic with the big feeding mouth, it can put the big plastic or rubber product freely.
2. The rotary and cutting blade with edge of special design, it can get very high efficiency and high capacity.
3. The shredder single shaft for plastic is controlled by PLC system; the blade can rotate in opposite direction and close automatically if something unexpected happens; with very high safety service.
4. The shredder single shaft for plastic runs slowly with low noise and less dusty.
5. The blade material with special alloy steel made, with long life.
6. All the machinery and electrical devices are protected in accordance with the European CE standard.
7. Hydraulic system Pushes the material automatically to the shredding rotor while working. More efficient and can achieve a high capacity. According to material kind, can adjust the pushing speed to avoid overload.
8. Cooler system(optional) can maintain the temperature for continuous operation.
Related Equipment:
Leave a Reply