The grinding process of plastic pulverizing machine

Time:2022-04-26

The plastic pulverizing machine uses a pressurized spring that can play a role in balancing and increasing pressure, as well as an elastic link that can play a role in smooth shock absorption. The plastic pulverizing machine adopts the principle of leverage and connects the symmetrical grinding roller assemblies together with a horizontally placed spring through a tie rod. When a large piece of material tops a grinding roller assembly, it is equipped with a powder selector impeller that can improve the precision of powder selection and high density of products. Practice shows that in the case of the same speed, increasing the density of the blade can improve the fineness of the finished product, in other words, in the case the fineness of the finished product does not need to change, a high-density impeller than low-density impeller speed, reducing the resistance to airflow, the same power to increase the output of finished products up to 50% or more.

plastic pulverizing machine, plastic pulverizer, plastic pulverizer for sale, lldpe pulverizer machine, plastic pulverizing

Adding material should be uniform, not more or less. Adding too much material will block the air duct, reduce the output, easy to burn the motor, adding too little material will also feed the output. Feeding particle size: hard material with a diameter of less than 15 mm is appropriate, the soft material diameter can be 20 mm, and it is strictly prohibited to add large pieces of material into the plastic grinding machine. Metal pieces are strictly prohibited to enter the machine, otherwise, the plastic pulverizing machine will damage the grinding roller and grinding ring, and even the center hanger, etc. Fineness adjustment, according to the size, softness, hardness, water content and specific gravity of the materials, the coarseness and fineness of processing are different, the analyzer above can be adjusted, high speed, high fineness, low speed, low fineness. Increase the fineness, the output will be reduced accordingly, if it still can not meet the requirements should be debugged fan speed, the user can be flexible.

Plastic pulverizing machine is a product that can be profitable to reflect the value of the process, but also the basis of whether a business can be measured in the long term development.

Main features of the plastic pulverizing machine.
● Easy to install and maintain, open the door cover to clean
● Adjustable powder size from 10 to 120 mesh, and easy to adjust
● The cooling system of the plastic mill adopts the combination of air and water cooling.
● New structure is adopted to improve the output and overcome the abrasion resistance
● The whole plastic grinding process is completely sealed, no dust pollution
● High output, fine grinding, energy-saving and environmental protection
● Wide range of applications, can grind PVC, PE, PS, PA, PC and other plastics