Vertical plastic mill has a wide range of applications in plastic, rubber, chemical and other industries. It is a good helper for manufacturers to reduce costs, save money, recycle plastic, save costs and reduce energy consumption.
Wanrooe machinery In view of the plastic mill users in the purchase of equipment, not clear plastic mill components and the working performance of each component, our technical staff to all the process is divided into different stages to give finishing can be for the majority of users to refer to and read.

1: The plastic mill body box
The body is the overall framework of the equipment, using carbon steel welded from, grinding disc type box using carbon steel or stainless steel welding after the bore boring machine finishing and parallelism and verticality correction.

2: Plastic grinding chamber
Grinding chamber is installed with fixed and dynamic disc, dynamic disc blade material for high complex steel casting and made, according to different models equipped with different numbers of blades, after dynamic and static balance test, double-sided knife mouth, grinding disc spiral type uniform distribution, can disperse the degree of force on the material, shear force becomes large, high-speed quality grinding disc can be used repeatedly after the rapid and easy replacement and adjustment of the grinding disc efficient, high productivity simple to use, long service life.

3: Grinding feeding part
Feeding method using electromagnetic vibration feeder, feeding uniform, stable current, with over-current protection device.

4: Transmission part
The main shaft adopts bearing steel tempering treatment, with high processing precision, to achieve smooth operation at high speed, with 3 imported special bearings for grinding machine inside, equipped with automatic lubricating oil refueling device, with European type belt pulley installed on the main shaft and motor, using SPB type belt transmission, easy to disassemble.

5：Air-feeding system and cooling system
The whole machine adopts air-cooled and water-cooled double cooling of high-quality design, cooling fast, time period, good effect, long time operation without heat, material conveying pipeline is made of 304 stainless steel.

The fine powder after grinding is brought into the vibrating screen for sorting with the circulating wind of the blower, and the materials that are too fine and coarse fall back to the regrinding, while the qualified fine powder enters the finished product storage device with the cyclone and is discharged through the powder discharge pipe, which is the finished product. In the mill chamber, due to the certain moisture in the material to be ground, the grinding heat, evaporation of water, and the tight interface of the whole machine, the outside gas is sucked in, so that the circulating air pressure to ensure that the mill works under negative pressure, the increased air flow through the residual air pipe into the dust collector, through the pulse dust collector is purified and discharged into the atmosphere.

6：Sorting and finished product packaging part
Automatic feeding and discharging, the machine can produce 10-60 mesh coarse powder by adding special devices. After the work starts in the main machine, the grinding roller rotates around the main shaft, and under the double action of high-pressure spring and centrifugal force, it rotates close to the grinding ring, and its rotating pressure is higher than that of the mill under the same power condition, so the output is greatly improved. All the grinding materials are sorted through the circular vibrating screen, and the mesh can be freely changed from 8 to 120 mesh according to the user’s demand, and there are elastic balls in the screen to make the materials flow well and not block the materials, and the mesh The coarse materials fall back to re-mill through the return pipe, and the qualified materials enter the finished product bin through the cyclone discharger.