• Non-woven Agglomerator, Cloth Agglomerator, Meltblown Cloth Agglomerator, Mask Compactor, Non-woven Compactor
  • Non-woven Agglomerator, Cloth Agglomerator, Meltblown Cloth Agglomerator, Mask Compactor, Non-woven Compactor

Waste Mask Meltblown Cloth Non-woven Agglomerator Compactor Machine

Scrap Mask Meltblown Cloth PP Non-woven Agglomerator Compactor Machine is used to agglomerate the textile scrap such as scraps mask , waste pp non-woven , PP non-woven, polyester non-woven, non-woven scrap, meltblowing scrap and etc.

  • Product Description
  • Technical Parameters
  • Video

Application areas:  
Scrap Mask Meltblown Cloth PP Non-woven Agglomerator Compactor Machine is used to agglomerate the textile scrap such as scraps mask, waste pp non-woven, PP non-woven, polyester non-woven, non-woven scrap, meltblowing scrap and etc.
Plastic Agglomerator Densifier Machine
Description:
Agglomerator (plastic film granulator) is a kind of waste thermoplastic thin film, and wall thickness is less than 2 mm of products can be granulated immediately. It can be wastes or thin film of soft polyvinyl chloride (PVC), high and low-pressure polyethylene, polypropylene and polystyrene, other thermoplastic plastic on aggregate, also on foaming polystyrene abandoned products for granulation.

Working principle:
Putting the waste into machine pot body make the material be quickly cut by the high speed rotating turn the blade and the fixed blade shear ,then the material along the pot body wall by the knife dish centrifugal force function ,at the same time, the material turning up and down by paddle and from all around to move towards to the center of the pot body. The friction of material itself and friction of pot wall and blades produce much friction heat under the high speed, making the temperature of the material rises to the half-plastic condition and connects to a small lump. Before the materials will block, advanced preparation quantitative water will all spray to the material. The cold water touches the hot materials will gasify and take out the surface heat soon, making the surface of the materials cool quickly and avoid blocking, then after the crushing effect between the rotary blade and fixed blade to cut into particles(irregular size materials). During the crushing, Also may join the appropriate color pigments according to needs.

Features
1.The Agglomerator is used for the fast recycling of waste non-woven and melt blowing.
2.The Machine can quickly granulate used thermoplastic film or the thermoplastic products which thickness less than 2mm.
3.It’s applicable to the agglomerating of soft polyvinyl chloride, HD/LD polyethylene, polypropylene, polystyrene and other used thermoplastic products or film.
4.The granules produced by the plastic agglomerator can be supplied to the pelletizing machine for further granulating or just fed to extruder and injection machine.
5.It is for augmentation of the bulk density of the LDPE, HDPE, PP, BOPP, PET film & bags flakes.

Special Features
The strong design of double-bearing for holding the main shaft.
High-performance blades.
Temperature control.
Water flushing automatically.
Motor power from 18.5kw to 132kw.
Processing capacity from 50kg/h to 500kg/h.

Leave a Reply

Your email address will not be published.

Model PNAG-100 PNAG-200 PNAG-300 PNAG-500 PNAG-600 PNAG-800 PNAG-1500
Spindle Speed (r/min) 1050 1050 950 850 750 750 650
Output(kg/h) 80-120 100-150 150-250 300-400 350-450 500-600 800-1000
Motor power(kw) 37 45 55 90 110 132 200
Voltage(V) 380 380 380 380 380 380 380
Volume(L) 100 200 300 500 600 800 1500
Weight(kg) 1000 1200 1800 2500 2700 3000 5000
Dimension(m) 1.7*0.75*1.5 1.7*0.85*1.5 2*0.85*1.6 2.3*0.95*1.7 2.3*1.1*1.75 2.5*1.25*1.8 3*1.6*2.1
Rotating Blades Qty(psc) 2 2 2 4 4 4 4
Fixed Blades Qty(psc) 6 6 6 8 8 8 8
Lubrication Method Grease lubrication Grease lubrication Grease lubrication Pressure lubrication Pressure lubrication Pressure lubrication Pressure lubrication

Video