• Waste Rubber Granulator Machine

Waste Rubber Granulator Machine

Tire crusher (also called rubber crusher, tire shredder) is a kind of equipment that can crush waste tires into rubber pieces under normal temperature. It mainly consists of tire hoisting machine, power system, crushing knife group, screening institutions and so on.

  • Product Description
  • Technical Parameters
  • Video

1. Tyre crushing machine is mainly used for crushing scrap rubber and waste tires. It is suitable for removing the mouth-ring steel wire and crushing truck tires, car radial tires, inner tires, rubber shoes and other scrap waste rubber products that are in line with their feeding sizes. It is conductive to waste recycling industry on old rubber coarse processing, reducing impact load noun construct of the crusher, shredder in reclaimed rubber plant, as well as improving crushing efficiency.
2. The waste tire rubber crusher machinery can be used as pretreatment device of fully automatic continuous pyrolysis plant to process waste tires and waste rubber into fuel oil. The crusher can shred waste tires into rubber pieces of 30-50mm, which can improve the pyrolysis efficiency.
3. The rubber crushing machine is also used as a part of rubber powder production line to produce rubber powder or rubber particles.

Tire crusher (also called rubber crusher, tire shredder) is a kind of equipment that can crush waste tires into rubber pieces under normal temperature. It mainly consists of tire hoisting machine, power system, crushing knife group, screening institutions and so on.

Working principle:
The tyre crushing machine adopts horizontal structure, overall base and stand-alone bearing, which is good for installation, commissioning and maintenance. The crushing of large waste rubber pieces are conducted in the crushing chamber of rough crusher. The crushing is completed by the cutter mounted in two parallel shafts. The two axes are rotating relatively according to a certain ratio, and the waste rubber are crushed under the relative movement of the jaws. The crushed rubber pieces drop on the rotary screen. The pieces that are in line with the size requirement drop on the conveyor belt through the screen holes and then are sent out; the other pieces that are not standard return the crushing chamber along with the screen and then are crushed again. The cutter surface is processed specially, with advantages of high hardness, stiffness and wear resistance. Transmission mode of crusher: the motor is decelerated by the pulleys; transmission and reducer two deceleration; and then drive the two spindle rotation.


Hydraulic Connector heavy duty crusher rotor
Hydraulic Connector
Oil link device is installed for each machine to keep the orderliness and smooth of oil pipes.
Special“L” design rotor help the machine achieve excellent grinding result saving energy and reducing noise.
heavy duty crusher screen heavy duty crusher motor overload protector
Special material assures the long-life abrasion resistance of the screen. Well-proportioned high-rate holes much improve the machine output.
Motor Overload Protector
Equipped with electrical current relay, motor overload protector and other multiple safety devices.
Hydraulic Cylinder Metal Detector
Hydraulic Cylinder
Hydraulic device makes opening the chamber and screens much easier.
Metal Detector(Optional)
Metal detectors can be combined with belt conveyors, and can interlock with the control system, to warn and stop the system, in case metal is found in feeding.
Hydraulic Equipment Cutting Chamber
Hydraulic Equipment
The hydraulic equipment can control the hydraulic cover opening of the crusher room, which makes the inspection and maintenance of the crusher room and the replacement of tools more convenient and fast.
Cutting Chamber
it’s easy to open the full chamber, Loosen the nut, the chamber can be opened within short time.
Screen Locked Device Shock Absorber Foot
Screen Locked Device
Simply design helps convenient operation and reduce much time to replace the screen.
Shock Absorber Foot
Foot with shock absorber to reduce vibration and eliminate noise.

Features :
1. Compact structure, reasonable layout, smooth operation, low energy consumption, high efficiency, convenient and simple installation and maintenance.
2. The machine is equipped with two kinds of feeding devices available for customers to choose, large conveyor belt and small hoist feeding. The customers can choose according to the area of the plant. The cutting edge is made of special hard alloy material and processed by special method, which has the advantages of long service life, high efficiency, advanced technology and easy to replace…
3. Two options for the discharge screen: traditional round screen and high efficient shaft linkage star screen mesh. It is configured according to the customers’ requirement.

Leave a Reply

Your email address will not be published. Required fields are marked *

Model Rotary
PNGM-35/60 2×2 3×2 600×360 22-30
PNGM-42/08 2×2 3×2 800×420 30-45
PNGM-42/10 2×2 3×2 1000×420 37-55
PNGM-63/10 2×2 5×2 1000×630 55-110
PNGM-63/12 2×2 5×2 1200×630 75-132
PNGM-70/10 2×2 7×2 1000×700 75-132
PNGM-70/12 2×2 7×2 1000×700 90-160